Audio-Technica AT-LPW40WN Fully Manual Belt-Drive Turntable(Audio Technica At Lpw40wn Fully Manual Belt Drive Turntable)

Audio-Technica AT-LPW40WN Fully Manual Belt-Drive Turntable

The Audio-Technica AT-LPW40WN Fully Manual Belt-Drive Turntable is engineered to deliver superior high-fidelity audio reproduction for your vinyl records. With its sleek and aesthetically pleasing design, featuring an anti-resonance MDF plinth with simulated walnut wood veneer, this turntable is built to minimize low-frequency acoustical feedback. The turntable is equipped with a sensor-monitored motor to ensure accurate platter rotation speeds at both 33-1/3 and 45 RPM.

This model includes a straight carbon-fiber tonearm with adjustable tracking force, enhancing its precision. Coming with the AT-HS4 universal half-inch mount headshell and the AT-VM95E Dual Moving Magnet phono cartridge, it promises an exceptional audio experience. Audio-Technica’s expertise of more than 50 years in phono cartridge design is evident in the versatility and high performance of the AT-VM95E cartridge, which is compatible with any VM95 Series replacement stylus for a wide range of options suited to various budgets and needs.

Key Features

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Speed-sensor system for accurate platter rotation
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminum platter with rubber mat
• AT-HS4 universal half-inch mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
• Compatibility with any VM95 Series replacement stylus
• Straight carbon-fiber tonearm with hydraulically damped lift control
• Anti-resonance MDF plinth with walnut simulated wood veneer
• Built-in switchable phono pre-amplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis for reduced noise in the signal chain

Specifications

• Turntable Type: Belt-drive manual
• Motor: DC servo with Active Speed Stabilization
• Drive Method: Belt drive
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Die-cast aluminum
• Wow and Flutter: Less than 0.15% WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio: Greater than 60dB
• Output Level Pre-amp PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level Pre-amp LINE: 200 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
• Power Supply Requirements: 100-240 V, 50/60 Hz, 0.5 A Max.
• Dimensions: 420.0 mm (16.53 inches) W x 340.0 mm (13.38 inches) D x 116.9 mm (4.6 inches) H
• Weight: 4.72 kg (10.40 lbs.) without dust cover

Package Contents

• Dust cover
• Platter
• Turntable mat
• Drive belt
• Counterweight
• AT-HS4 headshell
• AT-VM95E stereo cartridge
• 45-RPM adapter
• RCA audio cable (approx. 1.0 m / 3.3 feet)
• AC adapter (approx. 1.5 m / 4.9 feet) (AD-SA1205WE)
• Dust cover hinges