Doug Fleenor Design DMX24DIM 24 Channel 100W Rack Mount Dimmer(Doug Fleenor Design Dmx24dim 24 Channel 100w Rack Mount Dimmer)

Doug Fleenor Design DMX24DIM 24 Channel 100W Rack Mount Dimmer

The DMX24DIM and the DMX24DIM-2U are twenty-four output dimmers designed for high efficacy loads, low idle power, and minimal losses. Typical loads include Christmas light strings (LED and incandescent), and low power lamps such as LED, neon, compact fluorescent, electronic and magnetic low voltage, halogen and incandescent. Typical applications include Christmas tree lighting, cue lights, signs, marquees, and practicals. The DMX24DIM is a single-space rack mount unit, while the DMX24DIM-2U is a two-space rack mount unit, each with removable rack ears. Airflow is front to side. Half inch holes are provided for half couplers or C clamps. The enclosures feature a carry handle and a 3/8 inch safety cable slot.

Technical Specifications

Input circuit
Protected EIA-485 receiver (LT1785).
Input protection
Undamaged by up to 60 Volts continuous, 15KV transients.
Input signal
0.2 volts minimum, 12 volts maximum, DMX512, DMX512/1990, or DMX512-A.
Input connector
Gold plated 5 pin male XLR (Neutrik D-1 series) 3 pin XLR optional.
Input pass through
Gold plated 5 pin female XLR (Neutrik D-1 series). All five pins are passed through.
Termination
None. Unused pass through connectors must be externally terminated.
Power input
120 VAC 60 Hz 20 Amps at full load. Actual current draw is 0.05A plus connected load.
Power input connector
NEMA 5-15P (15A U-ground) on 18 inch 12 gauge pigtail. Connector must be replaced with a 20A connector for connected loads greater than 1800 Watts.
Idle power
Less than 1 Watt.
Power output
120 VAC 60 Hz 0.83 Amps maximum per output.
Minimum load
No minimum load requirement.
Size and weight
DMX24DIM: 1.7″H – 10.5″D – 19″W (17″ behind rack ears), 7 pounds
DMX24DIM-2U: 3.4″H – 10.5″D – 19″W (17″ behind rack ears), 7 pounds